StartBurn Error EN_SCSI_CDB_FAILED

Gouse · **Joined:** Mon Oct 19, 2009 10:54 am **Posts:** 36

Hi ,

Can you let me know what the error EN_SCSI_CDB_FAILED indicates? Was there any technical ground for this error.
My log shows the below error message
StarBurn_ISO9660JolietFileTree_ImportTrack error, en=8, status=0, text=CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

Presently i am using StarBurn 7.2 version

Thanks,
Gouse

andrey(staff) · **Joined:** Fri Jan 26, 2007 4:31 pm **Posts:** 452

Hello,

SCSI Command Data Block - CDB.
It's format of command for SCSI device.

We need full StarBurn.log for more information.

P.S.
And please update your StarBurn SDK

Gouse · **Joined:** Mon Oct 19, 2009 10:54 am **Posts:** 36

I will try to get the star burn log for this specifif issue.

Thanks,
Gouse

anton (staff) · **Posted:** Mon Jan 11, 2010 9:12 am

Please do it as we don't really expect our customers to trace SCSI commands sent to the device... I think you have more important and exciting things to do in your life

)

Gouse · **Joined:** Mon Oct 19, 2009 10:54 am **Posts:** 36

Hi,
Please see the attached star burn logs. Aftet writng 1.2 GB of data in 12 iterations(each 100 MB) it suddenly stops.

Thanks,
Gouse

anton (staff) · **Posted:** Thu Jan 14, 2010 8:16 pm

Version 7.2.20

We don't support this version any more (since 3 years or so). The only build we support now is V12, 20100110. Update to the most recent one and try again.

Gouse · **Joined:** Mon Oct 19, 2009 10:54 am **Posts:** 36

Hi,
Can you shed some light please what exactly going wrong from the logs? Pesently it is very tough for us to upgrade and distribute to all our customers.

Thanks,
Gouse

anton (staff) · **Posted:** Sat Jan 16, 2010 11:13 am

Log you've attached is a mass grave of all the actions performed by the customer for years. So last one failed is file system parsing failed b/c superblock (LBA 16) is unreadable b/c of the "unrecovered read error". Could be many reasons why it happened. Initially I'd upgrade both StarBurn and burner firmware to the most recents one and try again.

Unfortunately you'll have to do it (upgrade StarBurn to the V12) or you're not going to receive any support from us.

Gouse wrote:

Hi,
Can you shed some light please what exactly going wrong from the logs? Pesently it is very tough for us to upgrade and distribute to all our customers.

Thanks,
Gouse

#1 Burning Software

StartBurn Error EN_SCSI_CDB_FAILED

Who is online