#1 Burning Software

It is currently Sun Dec 22, 2024 10:55 pm

All times are UTC




Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Burn multiple images at the same time
PostPosted: Mon May 31, 2010 6:02 am 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
I just have a short question.

Is it possible to burn multiple images via the ActiveX at the same time or can issues appear due to device notifications when 1 image is burned and another drive (burner) gets ejected for example?
Is there anything that must be considered in such scenarios?

Thanks in advance.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Mon May 31, 2010 1:51 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
You can do it no problem. Just create a dedicated object for burner and matching image reader for every burner. And make sure you have enough of RAM to cache the writes and hard disk is able to feed the data at required burn speed :)


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Tue Jun 01, 2010 11:16 am 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
Well, i tried it.
I get a CStarburn_ScsiTransport::ExecuteCDB-> Status 31 (0x1f) on the second thread after some time.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Tue Jun 01, 2010 11:20 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Unfortunately this tells absolutely nothing. Grab full StarBurn log, zip and send to support@rocketdivision.com. Then we'll be able to tell what's wrong.

Mark Tels wrote:
Well, i tried it.
I get a CStarburn_ScsiTransport::ExecuteCDB-> Status 31 (0x1f) on the second thread after some time.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Tue Jun 01, 2010 12:16 pm 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
I have sent the logfile to the support email.
Thx


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Tue Jun 01, 2010 12:44 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
DeviceIoControl(...) Win32 API call fails with "invalid parameter". Can you switch to SPTD (CreateExEx) to sort out broken filter drivers issues.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Tue Jun 01, 2010 12:56 pm 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
No problem.
How do I do that? I havent found something about it in the help file / samples actually.
Any advice?


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Tue Jun 01, 2010 12:59 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Check CreateExEx(...) API call. Please check the samples (say FindDeviceExEx should be fine).

Mark Tels wrote:
No problem.
How do I do that? I havent found something about it in the help file / samples actually.
Any advice?


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Wed Jun 02, 2010 5:36 am 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
Ah, ok.
That is implemented in "StarBurn Core" i guess.
Is there a way to do this via the "StarBurnx" interface?

Beside that a single burn is fine and gets completed without any problems via the ActiveX.

Thanks in advance.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Wed Jun 02, 2010 6:02 am 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
Well.. I tried something else.
In the past I tried to burn the same image via 2 threads. Now I tried 2 different images and the burning process isnt interrupted.
I get an error but that is when the 1st burner object is destroyed. Actually the burner object gets destroyed and I eject the burned media from the
drive. It seems that at this point the 2nd burn thread gets the problems.

I have done a new logfile and sent it to the support.

Thanks in advance.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Wed Jun 02, 2010 6:51 am 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
Sorry for the mass of emails but its the eject on the burner.
I did a workaround and now wait until all burns have been finished before I eject a driver and it works without any problems .
I probably should have mentioned before that I have some computer with SATA card and attached to that I have a small 3 burner tower.

Can that probably cause the trouble?
Can you give me any advice on this?

Thanks in advance.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Wed Jun 02, 2010 8:00 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
That's exactly what I wrote you in my first post: each burner object should have matching image object...

OK, as it's StarBurnX rather then core issue I'm forwarding this to Dima :)

Mark Tels wrote:
Well.. I tried something else.
In the past I tried to burn the same image via 2 threads. Now I tried 2 different images and the burning process isnt interrupted.
I get an error but that is when the 1st burner object is destroyed. Actually the burner object gets destroyed and I eject the burned media from the
drive. It seems that at this point the 2nd burn thread gets the problems.

I have done a new logfile and sent it to the support.

Thanks in advance.


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Wed Jun 02, 2010 12:30 pm 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
Ok, so Iam waiting for Dimas response on the issue now.
Thanks Anton!


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Wed Jun 02, 2010 7:41 pm 
Offline

Joined: Thu Dec 13, 2007 8:44 am
Posts: 609
Hello, Mark

1) In order to switch to the SPTD layer you should call the InitializeEx function of the StarBurnX object, the last parameter allows you to choose the SPTD layer.

2) I'm investigating this problem :)

Regards,

Dmitry


Top
 Profile  
 
 Post subject: Re: Burn multiple images at the same time
PostPosted: Mon Jun 07, 2010 8:10 am 
Offline

Joined: Mon May 03, 2010 10:24 am
Posts: 20
Ok.
I used InitializeEx with SPTD entry and the system frooze some time after the 2nd thread was started.
Are there things that must be avoided to be called twice when using multiple burns?
For example Initialize(Ex) calls etc.?

I will forward the log to the support email.

Thanks in advance.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group