#1 Burning Software

It is currently Thu Dec 19, 2024 7:54 am

All times are UTC




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Burning Video to DVD streamed from capture card
PostPosted: Fri Jul 07, 2006 8:17 am 
Offline

Joined: Fri Jul 07, 2006 8:05 am
Posts: 4
Location: Australia
I have been reading this forum, and found some posts which discuss this subject, but I want to make things clear.

We need to build an application which takes a/v data from a video capture card and streams it to DVD in standard format (can be played on a standard DVD player).

We are not required to write direct to DVD, although that would be ideal. We need to write one chapter every 5 minutes of recorded video, so we could buffer the video to disk and write it out at the end of that period, assuming we could finish the burn quickly.

My understanding is that we would create a single title, and multiple chapters therein. There is no need for visual navigation (menus, etc) - the user would simply navigate between chapters with prev/next.

Our preference would be for a .NET-based (C#) system, but we could also handle C++. Linux would be nice, but not essential.

Can any of your sdks support this functionality?

Thanks in advance for your response. I hope this explanation is clear - I am still trying to get my brain around DVD burning concepts :)

regards
Michael Potter


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 07, 2006 11:32 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
No, you cannot do this with StarBurn SDK. And I even don't know the burning library capable of solving your task.


Top
 Profile  
 
 Post subject: Re: Burning Video to DVD streamed from capture ca
PostPosted: Mon Jul 10, 2006 1:23 am 
Offline

Joined: Fri Jul 07, 2006 8:05 am
Posts: 4
Location: Australia
Ok, thanks for that.

So, it is not possible to emulate the behaviour of a commercial DVD Recorder at all? That's what we are trying to achieve - to burn to DVD progressively, as the A/V data arrives.

I note the following posts which indicate that it may be possible:
viewtopic.php?t=599
viewtopic.php?t=356

Therefore, I was a little surprised at your response. I feel maybe I have not expressed my requirements accurately in my previous post. Hopefully the above makes things a little clearer...

Thanks in advance


Top
 Profile  
 
 Post subject: Re: Burning Video to DVD streamed from capture ca
PostPosted: Mon Jul 10, 2006 5:06 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
If you're OK with the padding (when initially you'd provide fixed file system layout and if you'd decide to stop burning in the middle of the process you'd have to do padding till the end of the FS layout) - we can provide you with other burning engine. Not StarBurn. And existing on Linux as well.

michaelp wrote:
Ok, thanks for that.

So, it is not possible to emulate the behaviour of a commercial DVD Recorder at all? That's what we are trying to achieve - to burn to DVD progressively, as the A/V data arrives.

I note the following posts which indicate that it may be possible:
viewtopic.php?t=599
viewtopic.php?t=356

Therefore, I was a little surprised at your response. I feel maybe I have not expressed my requirements accurately in my previous post. Hopefully the above makes things a little clearer...

Thanks in advance


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 10, 2006 6:32 am 
Offline

Joined: Fri Jul 07, 2006 8:05 am
Posts: 4
Location: Australia
Anton

Is padding required when pausing recording as well as stopping?

We would be interested in knowing more about this solution.

Can I email you about this and explain our requirements in more detail?

michaelp


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 10, 2006 8:41 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
You cannot stop streaming. At least it's not recommended (link blocks recorded automatically and disc may become unplayable by home DVD players).

Sure! Please write down full description to anton@rocketdivision.com as I don't think others are interested in our conversation to go on publically :)

Thanks!

michaelp wrote:
Anton

Is padding required when pausing recording as well as stopping?

We would be interested in knowing more about this solution.

Can I email you about this and explain our requirements in more detail?

michaelp


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 11, 2006 8:03 am 
Offline

Joined: Fri Jul 07, 2006 8:05 am
Posts: 4
Location: Australia
Anton

Sent you an email today (my company is Brain Juice Solutions).
Reply here if you didn't get it and I'll send it again.

regards
michaelp


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 11, 2006 10:48 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Got the stuff!

michaelp wrote:
Anton

Sent you an email today (my company is Brain Juice Solutions).
Reply here if you didn't get it and I'll send it again.

regards
michaelp


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group