how to burn dvd from VIDEO_TS folder

theticket · **Joined:** Thu Aug 07, 2008 4:34 pm **Posts:** 4

Chose Burn Video>followed Wizard chose my VIDEO_TS folder that has BUP/IFO/VOB files in it. Chose Track-At-Once and default record speed was 4.0x, but it kicks the disk out and never does anything. Can you tell me why or send me to a link that gives me more info about how to do this properly or to make a DVD from an MPG file??
Thankx

anton (staff) · **Posted:** Thu Aug 07, 2008 7:13 pm

Please send us StarBurn log. This is not normal and we need a bit more detailed description of what's wrong. Thanks1

theticket wrote:

Chose Burn Video>followed Wizard chose my VIDEO_TS folder that has BUP/IFO/VOB files in it. Chose Track-At-Once and default record speed was 4.0x, but it kicks the disk out and never does anything. Can you tell me why or send me to a link that gives me more info about how to do this properly or to make a DVD from an MPG file??
Thankx

theticket · **Joined:** Thu Aug 07, 2008 4:34 pm **Posts:** 4

8:55:22 : Creating DVD-Video
8:55:22 : "Source DVD Video directory: ""C:\Documents and Settings\JIM\My Documents\StevieRayDVD\dvd\VIDEO_TS"""
8:55:22 : Destination device: HL-DT-ST DVDRAM GSA-4081B
8:55:23 : Started
8:55:23 : Testing unit ready...
8:55:23 : Unit is ready!
8:55:23 : Probing supported write modes...
8:55:23 : Track-At-Once is supported!
8:55:23 : Getting BUP (Buffer Underrun Protection) support...
8:55:23 : Getting BUP successfully!
8:55:23 : Enabling BUP (Buffer Underrun Protection)...
8:55:23 : Enabling BUP successfully!
8:55:23 : Setting speed 4.0x (5540 KBps)...
8:55:23 : Setting speed 4.0x (5540 KBps) successfully!
8:55:23 : Sending OPC (Optimum Power Calibration)...
8:55:28 : Sending OPC successfully.
8:55:35 : Burning Error!
8:55:35 : Eject

aaron (staff) · **Posted:** Sun Aug 10, 2008 11:42 am

Unfortunately in your case we need COMPLETE log and not only trace window output... When this error happens you're asked to send us the log. Just allow StarBurn to do it. Thanks!

theticket · **Joined:** Thu Aug 07, 2008 4:34 pm **Posts:** 4

I did send the only log I got. I clicked on the button to "SAVE LOG" at the bottom of the dialog box that was on my screen after the disk kicked out and that is all it has in it. Is there another log somewhere else??

aaron (staff) · **Posted:** Mon Aug 11, 2008 4:09 pm

That's not a problem! Andrew will contact you via e-mail with detailed instructions how to proceed from this point. Thank you!

theticket wrote:

I did send the only log I got. I clicked on the button to "SAVE LOG" at the bottom of the dialog box that was on my screen after the disk kicked out and that is all it has in it. Is there another log somewhere else??

theticket · **Joined:** Thu Aug 07, 2008 4:34 pm **Posts:** 4

I think I may have found the problem. I think I had a bad DVD disk and even the next one was bad, so I switched DVD drives and discovered that one drive was saying I had a blank disk and the other said I had a used DVD, which would not work, so I used another new DVD disk and it seems to have burned correctly. Thanks for your time.
Jim

aaron (staff) · **Posted:** Tue Aug 12, 2008 6:47 am

Thank you very much for keeping us updated!

theticket wrote:

I think I may have found the problem. I think I had a bad DVD disk and even the next one was bad, so I switched DVD drives and discovered that one drive was saying I had a blank disk and the other said I had a used DVD, which would not work, so I used another new DVD disk and it seems to have burned correctly. Thanks for your time.
Jim

#1 Burning Software

how to burn dvd from VIDEO_TS folder

Who is online