Hello Support, 1) I am using StarBurnX, DiscEraser sample. I am erasing DVD-RW of SONY company with Max Write speed 2X with my Optiarc DVD-RW AD-7220S drive. After inserting this disc in the drive, I ran sample so I got the screen attached, where speed is not listed. [I have already re-inserted disc and then refreshed or even restarted erasing process.] As I discussed in the above post I got Divide by zero error, Here also I got the same error. I can figure out why? As speed selected was nothing, then you tried to use speed for erase process as 0 and in some mathematical calculation it failed. [I think before erasing checking for speed will solve the problem, in this case maximum Write speed of the drive, should be the default value of erase speed. I am already doing this in my sample application, but I am getting write speed as 0.]
2) I am attaching debug logs. Because of this failing DiscEraser was not closed after this crash. Similar behavior was observed in my sample application I am developing. No Exception. Erase process continued for an hour and nothing reported. I am attaching, for the same disc the detailed information extracted by one of the softwares as "Disc Info.rar" Thank you in advance.
Attachments: |
Disc Info.rar [525 Bytes]
Downloaded 943 times
|
StarBurn.rar [5.27 KiB]
Downloaded 908 times
|

Untitled.jpg [ 17.76 KiB | Viewed 9967 times ]
|
|