#1 Burning Software

How long should a typical Video or image capture take? Should I patiently wait 1-4 hours? The DVDs I tried stop at various places. The screen feedback indicates everything checks out ok:
...

21:13:26 : Try to check is DVD CSS protected...
21:13:26 : DVD is protected with CSS.
21:13:26 : Try to DVD Authorizing...
21:13:27 : DVD Authorized successfully.
21:13:27 : Grabbing...

Log file attached (tried. The extension .log is not allowed, The extension .txt is not allowed, no extension is not allowed)
It freezes at 17%. Is there a work-around?
Thanks,
Dan



CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size updated to 4194304 UCHARs

CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size is 1 MBs, 4194304 UCHARs

+++ StarBurn:StarBurn_CdvdBurnerGrabber_CreateExEx(): EXITing with success, burner/grabber at 0x02BE1640, device name is 'CdRom0'

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): ENTERed

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): [ CD ] Current Read 5540, Maximum Read 5540, Current Write 4234, Maximum Write 4234

CStarBurn_CdvdBurnerGrabber::GetCurrentSpeedsForDVD(): UPDATED, Descriptor: 0, Current read speed in KBps: 5540, StartPerformance: 2284, EndPerformance: 5540

CStarBurn_CdvdBurnerGrabber::GetCurrentSpeedsForDVD(): IGNORED, Descriptor: 1, Current read speed in KBps: 5540, StartPerformance: 5540, EndPerformance: 2284

CStarBurn_ScsiTransportSxxx::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 12, CDB Dump: 0xAC 0x14 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x32 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x05, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0A (10)
Command Specific Information: 0xAC 0x14 0x00 0x0A
Additional Sense Code (ASC): 0x24, Additional Sense Code Qualifier (ASCQ): 0x00

Looks like the disc has either RipGuard or ARccOS bad block based protection system together with CSS... You need other software to break it, not StarBurn.

Thanks. Makes sense.
Feature request: After a designated number of read failures or time-outs and lack of the percentage indicator advancing, it would be helpful to prompt the user for a Continue or Cancel button. Consider, "StarBurn is either unable to determine the protection system used on this resource or experience other read errors. Click Cancel to discontinue."

I assumed processing must still be occuring after 4 hours of waiting, because the drive was still churning and processes were active.

I think this is a good idea and we'll implement this in the nearest future. Thank you for suggestion!

Can we create ISO image of CSS protected Video DVD in StarBurn V12?

Thank you.

Yes.