#1 Burning Software

..each disk I try receive the following log

then it ejects the blank DVD after a couple seconds


[ Info ]: Burning data to the CD/DVD or Blu-Ray/HD-DVD disc 11:06:02
[ Info ]: Selected device: 'SONY DVD RW DRU-720A ' 11:06:02
[ Info ]: Requested burning speed: 16.0x or 22160 KB/s 11:06:02
[ Info ]: Testing unit ready... 11:06:02
[ Info ]: Unit is ready! 11:06:02
[ Info ]: Enabling BUP (Buffer Underrun Protection)... 11:06:02
[ Info ]: Device reported speed: 16.0x or 22160 KB/s 11:06:02
[ Info ]: Sending OPC (Optimum Power Calibration)... 11:06:02
[ Info ]: Compiling ISO9660 file system... 11:06:48
[ Info ]: Building ISO9660 volume... 11:06:49
[ Info ]: Starting burn in Track-At-Once mode 11:06:49
[ Info ]: Starting burn in Track-At-Once mode 11:06:53
*Error*: Burning failed! 11:06:53
[ Info ]:
System call failed: Status -2147286263
11:06:53
[ Info ]:
Exception Text: 'CStarBurn_ISO9660VolumeFile::RealRead: StarBurn_ISO2_VolumeSeekRead( 0x001A2A88, 0x020D0000, 65536, 96 ) failed, status -2147286263 [ 0x80030309 ]' 11:06:53
[ Info ]: Closing session... 11:06:53
[ Info ]:
SCSI Status: 0x00, CDB Length: 10, CDB Dump: 0x5B 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0A (10)
Command Specific Information: 0x00 0x00 0x00 0x00

Additional Sense Code (ASC): 0x3A, Additional Sense Code Qualifier (ASCQ): 0x00


11:06:53
[ Info ]: Eject 11:06:53

Hello,

Looks like problem with data which you want to burn.
0x80030309 - it's copy protection error.
What is the nature and the location of the files you are trying to burn?