#1 Burning Software

Failing to burn an .iso to a d/l burner. Starburn recognizes the drive and blank disc properly.

log:

17:31:05 : Creating CD/DVD or Blu-Ray/HD-DVD from image
17:31:05 : Source File:
: C:\temp_dvd\CRZ0NNW7\CRZ0NNW7.iso
17:31:05 : Destination device: HL-DT-ST DVD+-RW GSA-T21N
17:31:05 : Requested burning speed: Maximum
17:31:05 : Burn Method: Track-At-Once
17:31:05 : Started
17:31:06 : Testing unit ready...
17:31:06 : Unit is ready!
17:31:06 : Getting BUP (Buffer Underrun Protection) support...
17:31:06 : Getting BUP succeeded!
17:31:06 : Enabling BUP (Buffer Underrun Protection)...
17:31:06 : Enabling BUP succeeded!
17:31:06 : Try to set selected CD/DVD or Blu-Ray/HD-DVD speeds...
17:31:06 : Speeds successfully set
17:31:06 : Sending OPC (Optimum Power Calibration)...
17:31:22 : Burning
: Burning failed!
:
SCSI Status: 0x00, CDB Length: 12, CDB Dump: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x05, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0A (10)
Command Specific Information: 0xBF 0x35 0x37 0x3E

Additional Sense Code (ASC): 0x26, Additional Sense Code Qualifier (ASCQ): 0x00

Hello,

We already know about the problem. Will be fixed in the nearest time.
Thank you for collaboration.