Problem with CStarBurn_CdvdBurnerGrabber::TrackAtOnce()

Selina Yen · **Joined:** Fri Nov 30, 2007 9:08 am **Posts:** 3

When I try to burn data larger than 2G, sometimes CStarBurn_CdvdBurnerGrabber::TrackAtOnce() fails.
Does the following log imply anthing wrong?
Thank you.

CStarBurn_CdvdBurnerGrabber::WriteCacheThread(): Cache full event set #1
CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed
SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x2A 0x00 0x00 0x12 0x32 0xC0 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x03, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0A (10)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x0C, Additional Sense Code Qualifier (ASCQ): 0x00

CStarBurn_CdvdBurnerGrabber::TrackAtOnce(): Method in sequence failed

CStarBurn_CdvdBurnerGrabber::TrackAtOnce(): EXITing with failure, status 8, message 'CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed'

anton (staff) · **Posted:** Tue Dec 18, 2007 7:27 am

"Write failed". It could be generally EVERYTHING - small cache, BUP disabled, alien software filter etc. Don't quote the logs extracting the part you think is important. We need COMPLETE one. Please send it to support@rocketdivision.com. Thanks!

#1 Burning Software

Problem with CStarBurn_CdvdBurnerGrabber::TrackAtOnce()

Who is online