#1 Burning Software

It is currently Tue Dec 24, 2024 9:07 pm

All times are UTC




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: StarburnX Sample problem
PostPosted: Thu Jan 03, 2008 4:35 am 
Offline

Joined: Tue Dec 11, 2007 3:29 am
Posts: 12
Hi,

I was just evaluating the Dec 28 StarburnX DvdVideoBurner.exe. There seems to be a problem with something related to Plextor PX-800A drives.

Edit: This is only a problem in test mode, therefore minor.

Upon completion of test burning a DVD and getting the message that the disk was burned successfully I click OK. The Pioneer and Lite-On drives promptly eject the disk. The Plextor drive does not eject the disk, I must eject it manually. Also, I noted that the Plextor takes longer to burn, all cases set to 8X.

Note, the Lite-on and Pioneer drives are SATA and the Plextor is IDE.

Any ideas? Can I provide you with any other information?



Bob


Top
 Profile  
 
 Post subject: StarburnX burned DVD's not plaing on some DVD players
PostPosted: Tue Jan 08, 2008 5:53 am 
Offline

Joined: Tue Dec 11, 2007 3:29 am
Posts: 12
I am ready to use the StarburnX SDK and buy the license, however I see some problems.

Our studio uses Panasonic DVD equipment, mainly:
DMR-E55 (mfg 2004)
DMR-E20 (mfg 2002)
We have hundreds of hours of DVD's recorded by these models and it is a requirement for us that our copies play on them.

The DVD's I burned usng the StarburnX C# DvdVideoBurner.exe and Starburn SDK Cbuilder VideoBurner.exe will not play on these Panasonic DVD players/recorders. The menue is dsplayed but the disk will not play. The master will auto play shortly after it is placed in the drive. I tried with and without the 1GB paddng.
Note, these are the sample .exe programs, not my code.


I burned the same data usng NERO (default settings, 8X speed), those DVD's work just like the master. (also, in test mode - NERO properly ejects the disk using the plextor burner)

Would you please look into this? Please let me know if you need more specifc data.

Thanks.
Bob


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 08, 2008 9:06 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
StarBurn core had some issues with this Plextor device but they have been fixed some time ago. I need to check do Dima has recent sources to build StarBurnX wrapper from.

In any case this is minor communications issue and I'll be able to help you after January 12th when I'll be back :)

Thank you for your patience!


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 31, 2008 3:33 am 
Offline

Joined: Tue Dec 11, 2007 3:29 am
Posts: 12
anton (staff) wrote:
StarBurn core had some issues with this Plextor device but they have been fixed some time ago. I need to check do Dima has recent sources to build StarBurnX wrapper from.

In any case this is minor communications issue and I'll be able to help you after January 12th when I'll be back :)

Thank you for your patience!


Hi Anton,
I am still interested in this problem. This was a "show stopper", but I will reconsider. (for now I'm doing my Plan "B")


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 31, 2008 7:45 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Please issue us with the logs of the problem and also give a try to the latest StarBurnX build. It's built on the top of the new StarBurn core so particular Plextor should work fine.

bob1at7shore wrote:
anton (staff) wrote:
StarBurn core had some issues with this Plextor device but they have been fixed some time ago. I need to check do Dima has recent sources to build StarBurnX wrapper from.

In any case this is minor communications issue and I'll be able to help you after January 12th when I'll be back :)

Thank you for your patience!


Hi Anton,
I am still interested in this problem. This was a "show stopper", but I will reconsider. (for now I'm doing my Plan "B")


Top
 Profile  
 
 Post subject: Re: StarburnX burned DVD's not plaing on some DVD players
PostPosted: Thu Jan 31, 2008 2:37 pm 
Offline

Joined: Tue Dec 11, 2007 3:29 am
Posts: 12
I'm sorry, I was not clear. I am not reffering to the minor Plextor issue. I am reffering to this:

bob1at7shore wrote:
I am ready to use the StarburnX SDK and buy the license, however I see some problems.

Our studio uses Panasonic DVD equipment, mainly:
DMR-E55 (mfg 2004)
DMR-E20 (mfg 2002)
We have hundreds of hours of DVD's recorded by these models and it is a requirement for us that our copies play on them.

The DVD's I burned usng the StarburnX C# DvdVideoBurner.exe and Starburn SDK Cbuilder VideoBurner.exe will not play on these Panasonic DVD players/recorders. The menue is dsplayed but the disk will not play. The master will auto play shortly after it is placed in the drive. I tried with and without the 1GB paddng.
Note, these are the sample .exe programs, not my code.


I burned the same data usng NERO (default settings, 8X speed), those DVD's work just like the master. (also, in test mode - NERO properly ejects the disk using the plextor burner)

Would you please look into this? Please let me know if you need more specifc data.

Thanks.
Bob



I will try the newest build.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 31, 2008 4:06 pm 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
OK, you're third guy having the same issues with the StarBurn DVD-Video and I really have to fix it... These are good news for now :)

Could you please give a try to this build:

http://www.rocketdivision.com/downloads ... 080215.zip

just use DVDVideoBuildImageEx to create ISO and burn it with Nero. Send me the log and let me know did it work or not.

Thank you!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 01, 2008 12:32 am 
Offline

Joined: Tue Dec 11, 2007 3:29 am
Posts: 12
anton (staff) wrote:
OK, you're third guy having the same issues with the StarBurn DVD-Video and I really have to fix it... These are good news for now :)

Could you please give a try to this build:

http://www.rocketdivision.com/downloads ... 080215.zip

just use DVDVideoBuildImageEx to create ISO and burn it with Nero. Send me the log and let me know did it work or not.

Thank you!


The link to the zip file is dead. I noticed that your website changed, maybe that is the reason?
Bob


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 01, 2008 7:39 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
Sorry, my fault :( Correct one is:

http://www.rocketdivision.com/downloads ... 080115.zip

Thank you!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 02, 2008 7:31 am 
Offline

Joined: Tue Dec 11, 2007 3:29 am
Posts: 12
I Ran DVDVideoBuildImageEx.exe to make an iso file. I'm not sure what version I ran, snce I copied the dll's you sent in the .exe folder. Anyway, I burned dvd's from the iso using nero and 1 other program. Both worked on the newer player and both failed on the older player.

I would think an iso image would produce a duplicate of the master. Do you have a duplicator machine? There is a compare feature that will tell you if DVD's compare.



I could not build, .. I need some help to complete the test and give you a log :

DVDVideoBuildImageEx.c
b:\vs\rocket division software\starburn sdk\samples\console\c\..\..\..\Include\StarBurn.h(3659) : warning C4047: 'function' : 'size_t' differs in levels of indirection from 'unsigned short [8]'
b:\vs\rocket division software\starburn sdk\samples\console\c\..\..\..\Include\StarBurn.h(3659) : warning C4024: 'swprintf' : different types for formal and actual parameter 2
Microsoft (R) Incremental Linker Version 8.00.50727.762
Copyright (C) Microsoft Corporation. All rights reserved.

/out:DVDVideoBuildImageEx.exe
/debug
/NODEFAULTLIB:libcmt.lib
..\..\Lib\Static\Debug\i386\StarBurn.lib
..\..\Lib\Static\Debug\i386\StarLink.lib
..\..\Lib\Static\Debug\i386\StarCode.lib
..\..\Lib\Static\Debug\i386\StarWave.lib
user32.lib
advapi32.lib
ole32.lib
DVDVideoBuildImageEx.obj
StarBurn.lib(starburn.obj) : error LNK2019: unresolved external symbol _SptdUserGetPlatformInfo@16 referenced in function _StarBurn_SPTD_GetVersion@12
StarBurn.lib(starburn_core.obj) : error LNK2001: unresolved external symbol _SptdUserGetPlatformInfo@16
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserOpenDevice@16 referenced in function "public: __thiscall CStarBurn_ScsiTransportSPTD::CStarBurn_ScsiTransportSPTD(unsigned short *,unsigned char)" (??0CStarBurn_ScsiTransportSPTD@@QAE@PAGE@Z)
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserEnumDevices@24 referenced in function "public: __thiscall CStarBurn_ScsiTransportSPTD::CStarBurn_ScsiTransportSPTD(unsigned short *,unsigned char)" (??0CStarBurn_ScsiTransportSPTD@@QAE@PAGE@Z)
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserCloseDevice@8 referenced in function "public: virtual __thiscall CStarBurn_ScsiTransportSPTD::~CStarBurn_ScsiTransportSPTD(void)" (??1CStarBurn_ScsiTransportSPTD@@UAE@XZ)
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserSendCommand@24 referenced in function "protected: virtual void __thiscall CStarBurn_ScsiTransportSPTD::ExecuteCDB(unsigned char *,unsigned long,unsigned char *,unsigned long,unsigned char,union _LARGE_INTEGER *,union _LARGE_INTEGER *)" (?ExecuteCDB@CStarBurn_ScsiTransportSPTD@@MAEXPAEK0KEPAT_LARGE_INTEGER@@1@Z)
StarBurn.lib(starwave2_encodermp3.obj) : error LNK2001: unresolved external symbol __iob
DVDVideoBuildImageEx.exe : fatal error LNK1120: 6 unresolved externals


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 02, 2008 11:03 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
1) Fine, so it's really issue inside the core and not inside StarBurnX wrapper.

2) You don't include all the LIBs into the project that's why you cannot build executable.

bob1at7shore wrote:
I Ran DVDVideoBuildImageEx.exe to make an iso file. I'm not sure what version I ran, snce I copied the dll's you sent in the .exe folder. Anyway, I burned dvd's from the iso using nero and 1 other program. Both worked on the newer player and both failed on the older player.

I would think an iso image would produce a duplicate of the master. Do you have a duplicator machine? There is a compare feature that will tell you if DVD's compare.



I could not build, .. I need some help to complete the test and give you a log :

DVDVideoBuildImageEx.c
b:\vs\rocket division software\starburn sdk\samples\console\c\..\..\..\Include\StarBurn.h(3659) : warning C4047: 'function' : 'size_t' differs in levels of indirection from 'unsigned short [8]'
b:\vs\rocket division software\starburn sdk\samples\console\c\..\..\..\Include\StarBurn.h(3659) : warning C4024: 'swprintf' : different types for formal and actual parameter 2
Microsoft (R) Incremental Linker Version 8.00.50727.762
Copyright (C) Microsoft Corporation. All rights reserved.

/out:DVDVideoBuildImageEx.exe
/debug
/NODEFAULTLIB:libcmt.lib
..\..\Lib\Static\Debug\i386\StarBurn.lib
..\..\Lib\Static\Debug\i386\StarLink.lib
..\..\Lib\Static\Debug\i386\StarCode.lib
..\..\Lib\Static\Debug\i386\StarWave.lib
user32.lib
advapi32.lib
ole32.lib
DVDVideoBuildImageEx.obj
StarBurn.lib(starburn.obj) : error LNK2019: unresolved external symbol _SptdUserGetPlatformInfo@16 referenced in function _StarBurn_SPTD_GetVersion@12
StarBurn.lib(starburn_core.obj) : error LNK2001: unresolved external symbol _SptdUserGetPlatformInfo@16
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserOpenDevice@16 referenced in function "public: __thiscall CStarBurn_ScsiTransportSPTD::CStarBurn_ScsiTransportSPTD(unsigned short *,unsigned char)" (??0CStarBurn_ScsiTransportSPTD@@QAE@PAGE@Z)
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserEnumDevices@24 referenced in function "public: __thiscall CStarBurn_ScsiTransportSPTD::CStarBurn_ScsiTransportSPTD(unsigned short *,unsigned char)" (??0CStarBurn_ScsiTransportSPTD@@QAE@PAGE@Z)
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserCloseDevice@8 referenced in function "public: virtual __thiscall CStarBurn_ScsiTransportSPTD::~CStarBurn_ScsiTransportSPTD(void)" (??1CStarBurn_ScsiTransportSPTD@@UAE@XZ)
StarBurn.lib(starburn_core.obj) : error LNK2019: unresolved external symbol _SptdUserSendCommand@24 referenced in function "protected: virtual void __thiscall CStarBurn_ScsiTransportSPTD::ExecuteCDB(unsigned char *,unsigned long,unsigned char *,unsigned long,unsigned char,union _LARGE_INTEGER *,union _LARGE_INTEGER *)" (?ExecuteCDB@CStarBurn_ScsiTransportSPTD@@MAEXPAEK0KEPAT_LARGE_INTEGER@@1@Z)
StarBurn.lib(starwave2_encodermp3.obj) : error LNK2001: unresolved external symbol __iob
DVDVideoBuildImageEx.exe : fatal error LNK1120: 6 unresolved externals


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 03, 2008 12:16 am 
Offline

Joined: Tue Dec 11, 2007 3:29 am
Posts: 12
Ok, I will keep trying. Meanwhile, do you have enough information from me? Let me know if you want me test a new version.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 03, 2008 12:22 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
If you mean DVD-Video issues we have more then enough of it from the other guys. We'll check the version with them and then we'll kindly ask you to run the tests :) Thank you!

bob1at7shore wrote:
Ok, I will keep trying. Meanwhile, do you have enough information from me? Let me know if you want me test a new version.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group