#1 Burning Software

It is currently Thu Dec 19, 2024 9:08 am

All times are UTC




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Error While Canceling
PostPosted: Wed Mar 07, 2007 3:44 am 
Offline

Joined: Mon Sep 06, 2004 1:45 pm
Posts: 118
I'm Using DAO to burn and when I call cancel, I get an error. Here is the log file.

StarBurn CD/DVD Burning, Grabbing and Mastering Toolkit for Windows 95/98/Me/NT/2000/XP/2003 Version 6.6.30 ( 0x20060630 )
Copyright (c) Rocket Division Software 2001-2006. All rights reserved.

StarBurn:StarBurn_SetEjectAfterFail(): ENTERed for 0

StarBurn:StarBurn_SetEjectAfterFail(): EXITing with succes, is eject after fail enabled == 0

StarBurn:StarBurn_SetBufferUnderrunTimeOutInMs(): ENTERed for 0

StarBurn:StarBurn_SetBufferUnderrunTimeOutInMs(): EXITing with succes, currently set buffer underrun time out in milliseconds == 1000

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\A:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\A:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\B:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\B:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): Device '\\.\\\.\C:' has SCSI address of 3:0:2:0

SCSI Capabilites Dump:
Length: 24 UCHAR(s), Maximum Transfer Lenght: 131072 UCHAR(s)
Maximum Physical Page(s) Per Data Buffer: 33, Supported Asynchronous Event(s): 0, Alignment Mask: 1
Tagged Command Queueing Supported: No, Adapter Scans Down for BIOS Device(s): No, Adapter Uses Programmed I/O: Yes

SCSI Device Inquiry Data Dump:
Device Type: 0x00, Removable: No
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'HDT72252', Product ID: '5DLA380 ', Revision Level: 'V44O'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'HDT72252' - '5DLA380 ' - 'V44O' sits at 3:0:2:0

CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05
CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): EXITing with failure, status 9, message 'CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): Device '\\.\\\.\D:' has SCSI address of 3:0:2:0

SCSI Capabilites Dump:
Length: 24 UCHAR(s), Maximum Transfer Lenght: 131072 UCHAR(s)
Maximum Physical Page(s) Per Data Buffer: 33, Supported Asynchronous Event(s): 0, Alignment Mask: 1
Tagged Command Queueing Supported: No, Adapter Scans Down for BIOS Device(s): No, Adapter Uses Programmed I/O: Yes

SCSI Device Inquiry Data Dump:
Device Type: 0x00, Removable: No
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'HDT72252', Product ID: '5DLA380 ', Revision Level: 'V44O'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'HDT72252' - '5DLA380 ' - 'V44O' sits at 3:0:2:0

CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05
CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): EXITing with failure, status 9, message 'CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): Device '\\.\\\.\E:' has SCSI address of 1:0:0:0

SCSI Capabilites Dump:
Length: 24 UCHAR(s), Maximum Transfer Lenght: 131072 UCHAR(s)
Maximum Physical Page(s) Per Data Buffer: 32, Supported Asynchronous Event(s): 0, Alignment Mask: 1
Tagged Command Queueing Supported: No, Adapter Scans Down for BIOS Device(s): No, Adapter Uses Programmed I/O: Yes

SCSI Device Inquiry Data Dump:
Device Type: 0x05, Removable: Yes
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'HL-DT-ST', Product ID: 'DVDRRW GWA-4164B', Revision Level: '1.01'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'HL-DT-ST' - 'DVDRRW GWA-4164B' - '1.01' sits at 1:0:0:0

CD/DVD Capabilities Page Dump:
Page Code: 0x2A, Reserved1: 0x00, PSBit (Page Savable): 0
Page Size in UCHARs: 54 UCHARs, CD-R Read: Yes, CD-E Read: Yes
DVD-ROM Read: Yes, DVD-R Read: Yes, DVD-RAM Read: No, Reserved2: 0x00
CD-R Write: Yes, CD-E Write: Yes, Test Write: Yes
Reserved3: 0x00, DVD-R Write: Yes, DVD-RAM Write: No
Reserved4: 0x00, Audio Play: Yes, Composite: No
Digital Port One: No, Digital Port Two: No
MODE2 Form1: Yes, MODE2 Form2: Yes
Is Multi Session: Yes, CDDA: Yes, CDDAAccurate: Yes
BUP (Buffer Underrun Protection) Supported: Yes
RW Supported: No, RW Deinterleaved: No, C2Pointers: No
ISRC: Yes, UPC: Yes, Read Bar Code Capable: No
Lock: Yes, LockState: 0, Prevent Jumper: No
Reserved5: 0x00, Eject: Yes, Loading Mechanism Type: 0x01
Separate Volume: Yes, Separate Channel Mute: Yes
Supports Disc Present: No, SW Slot Selection: No
Side Change Capable: No, RW InLeadIn Readable: No, Reserved6: 0x00
Maximum Read Speed: 7056 KBps
Number Of Volume Level(s): 255, Buffer Size in KBs: 2048
Current Read Speed: 4234 KBps
Reserved7: 0x00
BCK: No, RCK: No, LSBF: No, Length: 0x00
Reserved8: 0x00
Maximum Write Speed: 1764 KBps
Current Write Speed: 1764 KBps
Reserved9: 0x0001


CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size updated to 4194304 UCHARs

CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size is 1 MBs, 4194304 UCHARs

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): ENTERed

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): [ CD ] Current Read 4234, Maximum Read 7056, Current Write 1764, Maximum Write 1764

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): EXITing with success

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): Device '\\.\\\.\F:' has SCSI address of 1:0:1:0

SCSI Capabilites Dump:
Length: 24 UCHAR(s), Maximum Transfer Lenght: 131072 UCHAR(s)
Maximum Physical Page(s) Per Data Buffer: 32, Supported Asynchronous Event(s): 0, Alignment Mask: 1
Tagged Command Queueing Supported: No, Adapter Scans Down for BIOS Device(s): No, Adapter Uses Programmed I/O: Yes

SCSI Device Inquiry Data Dump:
Device Type: 0x05, Removable: Yes
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'LITE-ON ', Product ID: 'DVD SOHD-16P9S ', Revision Level: 'FRS3'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'LITE-ON ' - 'DVD SOHD-16P9S ' - 'FRS3' sits at 1:0:1:0

CD/DVD Capabilities Page Dump:
Page Code: 0x2A, Reserved1: 0x00, PSBit (Page Savable): 0
Page Size in UCHARs: 24 UCHARs, CD-R Read: Yes, CD-E Read: Yes
DVD-ROM Read: Yes, DVD-R Read: Yes, DVD-RAM Read: No, Reserved2: 0x00
CD-R Write: No, CD-E Write: No, Test Write: No
Reserved3: 0x00, DVD-R Write: No, DVD-RAM Write: No
Reserved4: 0x00, Audio Play: Yes, Composite: Yes
Digital Port One: No, Digital Port Two: No
MODE2 Form1: Yes, MODE2 Form2: Yes
Is Multi Session: Yes, CDDA: Yes, CDDAAccurate: Yes
BUP (Buffer Underrun Protection) Supported: No
RW Supported: Yes, RW Deinterleaved: No, C2Pointers: Yes
ISRC: Yes, UPC: Yes, Read Bar Code Capable: No
Lock: Yes, LockState: 0, Prevent Jumper: No
Reserved5: 0x00, Eject: Yes, Loading Mechanism Type: 0x01
Separate Volume: Yes, Separate Channel Mute: Yes
Supports Disc Present: No, SW Slot Selection: No
Side Change Capable: No, RW InLeadIn Readable: Yes, Reserved6: 0x00
Maximum Read Speed: 8467 KBps
Number Of Volume Level(s): 256, Buffer Size in KBs: 254
Current Read Speed: 8467 KBps
Reserved7: 0x00
BCK: No, RCK: No, LSBF: No, Length: 0x01
Reserved8: 0x00
Maximum Write Speed: 0 KBps
Current Write Speed: 0 KBps
Reserved9: 0x0001


CStarBurn_ScsiDeviceCdvdRomWriter::CStarBurn_ScsiDeviceCdvdRomWriter_SharedConstructor(): WARNING! Device does not support recording

CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size is 1 MBs, 1048576 UCHARs

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): ENTERed

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): [ CD ] Current Read 8467, Maximum Read 8467, Current Write 0, Maximum Write 0

CStarBurn_CdvdBurnerGrabber::GetCdvdSpeeds(): EXITing with success

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_ADDRESS, '\\.\\\.\G:' ) failed, status 50 ( 0x32 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_CAPABILITIES, '\\.\\\.\G:' ) failed, status 50 ( 0x32 )

SCSI Device Inquiry Data Dump:
Device Type: 0x00, Removable: Yes
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'Generic ', Product ID: '2.0 Reader-CF ', Revision Level: '1.00'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'Generic ' - '2.0 Reader-CF ' - '1.00' sits at 255:255:255:0

CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05
CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): EXITing with failure, status 9, message 'CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_ADDRESS, '\\.\\\.\H:' ) failed, status 50 ( 0x32 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_CAPABILITIES, '\\.\\\.\H:' ) failed, status 50 ( 0x32 )

SCSI Device Inquiry Data Dump:
Device Type: 0x00, Removable: Yes
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'Generic ', Product ID: '2.0 Reader-SM/xD', Revision Level: '1.00'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'Generic ' - '2.0 Reader-SM/xD' - '1.00' sits at 255:255:255:0

CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05
CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): EXITing with failure, status 9, message 'CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_ADDRESS, '\\.\\\.\I:' ) failed, status 50 ( 0x32 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_CAPABILITIES, '\\.\\\.\I:' ) failed, status 50 ( 0x32 )

SCSI Device Inquiry Data Dump:
Device Type: 0x00, Removable: Yes
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'Generic ', Product ID: '2.0 Reader-SD ', Revision Level: '1.00'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'Generic ' - '2.0 Reader-SD ' - '1.00' sits at 255:255:255:0

CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05
CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): EXITing with failure, status 9, message 'CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_ADDRESS, '\\.\\\.\J:' ) failed, status 50 ( 0x32 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! DeviceIoControl( IOCTL_SCSI_GET_CAPABILITIES, '\\.\\\.\J:' ) failed, status 50 ( 0x32 )

SCSI Device Inquiry Data Dump:
Device Type: 0x00, Removable: Yes
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'Generic ', Product ID: '2.0 Reader-MS ', Revision Level: '1.00'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'Generic ' - '2.0 Reader-MS ' - '1.00' sits at 255:255:255:0

CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05
CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): EXITing with failure, status 9, message 'CStarBurn_ScsiDeviceCdvdRomReader::CStarBurn_ScsiDeviceCdvdRomReader_SharedConstructor(): Device type 0x00 instead of 0x05'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\K:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\K:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\L:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\L:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\M:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\M:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\N:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\N:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\O:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\O:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\P:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\P:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\Q:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\Q:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\R:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\R:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\S:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\S:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\T:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\T:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\U:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\U:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\V:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\V:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\W:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\W:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\X:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\X:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\Y:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 5 ( 0x5 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\Y:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 5 ( 0x5 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\Z:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 5 ( 0x5 )
CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): EXITing with failure, status 5, message 'CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): CreateFile( '\\.\\\.\Z:', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 5 ( 0x5 )'

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): WARNING! CreateFile( '\\.\StarOpen', 0xc0000000, 3, 0x00000000, 3, 0, 0x00000000 ) failed, status 2 ( 0x2 )

CStarBurn_ScsiTransportSPTI::CStarBurn_ScsiTransportSPTI(): Device '\\.\\\.\E:' has SCSI address of 1:0:0:0

SCSI Capabilites Dump:
Length: 24 UCHAR(s), Maximum Transfer Lenght: 131072 UCHAR(s)
Maximum Physical Page(s) Per Data Buffer: 32, Supported Asynchronous Event(s): 0, Alignment Mask: 1
Tagged Command Queueing Supported: No, Adapter Scans Down for BIOS Device(s): No, Adapter Uses Programmed I/O: Yes

SCSI Device Inquiry Data Dump:
Device Type: 0x05, Removable: Yes
SCSI Version: 0, Soft Reset Supported: No
Command Queue Supported: No, Linked Commands Supported: No
Sync Transfer Supported: No, 16-bit bus: No
32-bit bus: No, Relative Addressing Supported: No
Vendor ID: 'HL-DT-ST', Product ID: 'DVDRRW GWA-4164B', Revision Level: '1.01'


CStarBurn_ScsiDeviceGeneric::CStarBurn_ScsiDeviceGeneric_SharedConstructor(): 'HL-DT-ST' - 'DVDRRW GWA-4164B' - '1.01' sits at 1:0:0:0

CD/DVD Capabilities Page Dump:
Page Code: 0x2A, Reserved1: 0x00, PSBit (Page Savable): 0
Page Size in UCHARs: 54 UCHARs, CD-R Read: Yes, CD-E Read: Yes
DVD-ROM Read: Yes, DVD-R Read: Yes, DVD-RAM Read: No, Reserved2: 0x00
CD-R Write: Yes, CD-E Write: Yes, Test Write: Yes
Reserved3: 0x00, DVD-R Write: Yes, DVD-RAM Write: No
Reserved4: 0x00, Audio Play: Yes, Composite: No
Digital Port One: No, Digital Port Two: No
MODE2 Form1: Yes, MODE2 Form2: Yes
Is Multi Session: Yes, CDDA: Yes, CDDAAccurate: Yes
BUP (Buffer Underrun Protection) Supported: Yes
RW Supported: No, RW Deinterleaved: No, C2Pointers: No
ISRC: Yes, UPC: Yes, Read Bar Code Capable: No
Lock: Yes, LockState: 0, Prevent Jumper: No
Reserved5: 0x00, Eject: Yes, Loading Mechanism Type: 0x01
Separate Volume: Yes, Separate Channel Mute: Yes
Supports Disc Present: No, SW Slot Selection: No
Side Change Capable: No, RW InLeadIn Readable: No, Reserved6: 0x00
Maximum Read Speed: 7056 KBps
Number Of Volume Level(s): 255, Buffer Size in KBs: 2048
Current Read Speed: 4234 KBps
Reserved7: 0x00
BCK: No, RCK: No, LSBF: No, Length: 0x00
Reserved8: 0x00
Maximum Write Speed: 1764 KBps
Current Write Speed: 1764 KBps
Reserved9: 0x0001


CStarBurn_CdvdBurnerGrabber::CStarBurn_CdvdBurnerGrabber_SharedConstructor(): Cache size is 64 MBs, 67108864 UCHARs

CStarBurn_CdvdBurnerGrabber::TestUnitReady(): ENTERed for 0 second(s), is fast exit: 1

CStarBurn_CdvdBurnerGrabber::TestUnitReady(): EXITing with success

CStarBurn_CdvdBurnerGrabber::GetInsertedDiscType(): ENTERed

CStarBurn_CdvdBurnerGrabber::GetInsertedDiscType(): EXITing with success, disc type == 0x00000003

StarBurn:StarBurn_CdvdBurnerGrabber_GetTrackInformation(): ENTERed for track number 0xFF

StarBurn_DumpCdvdWriteParametersPage(): WARNING! Size 50 less then 56!

Write Parameters Page Dump:
Page Code: 0x05, PSBit (Page Saveable): 0
Page Length: 50 UCHARs, Write Type: 0x01, Test Write: No, Reserved2_1: 0x00
BUP (Buffer Underrun Protection) Enabled: Yes
Track Mode: 0x04, Copy Allowed: No, FP (Is Fixed Packet): No
Next Session: 0x03, Data Block Type: 0x0A, Reserved4: 0x00
Host Application Code: 0x00, Session Format: 0x20
Packet Size: 32, Audio Pause Length: 150
Media Catalog Number: 0x00000000000000000000000000000000
ISRC: 0x00000000000000000000000000000000
SubHeaderUCHAR0: 0x00, SubHeaderUCHAR1: 0x00
SubHeaderUCHAR2: 0x00, SubHeaderUCHAR3: 0x00
Vendor Specific: 0x00 0x00 0x00 0x00


StarBurn_DumpCdvdWriteParametersPage(): WARNING! Size 50 less then 56!

Write Parameters Page Dump:
Page Code: 0x05, PSBit (Page Saveable): 0
Page Length: 50 UCHARs, Write Type: 0x01, Test Write: No, Reserved2_1: 0x00
BUP (Buffer Underrun Protection) Enabled: No
Track Mode: 0x04, Copy Allowed: No, FP (Is Fixed Packet): No
Next Session: 0x00, Data Block Type: 0x08, Reserved4: 0x00
Host Application Code: 0x00, Session Format: 0x00
Packet Size: 32, Audio Pause Length: 150
Media Catalog Number: 0x00000000000000000000000000000000
ISRC: 0x00000000000000000000000000000000
SubHeaderUCHAR0: 0x00, SubHeaderUCHAR1: 0x00
SubHeaderUCHAR2: 0x00, SubHeaderUCHAR3: 0x00
Vendor Specific: 0x00 0x00 0x00 0x00


StarBurn_DumpCdvdWriteParametersPage(): WARNING! Size 50 less then 56!

Write Parameters Page Dump:
Page Code: 0x05, PSBit (Page Saveable): 0
Page Length: 50 UCHARs, Write Type: 0x01, Test Write: No, Reserved2_1: 0x00
BUP (Buffer Underrun Protection) Enabled: No
Track Mode: 0x04, Copy Allowed: No, FP (Is Fixed Packet): No
Next Session: 0x00, Data Block Type: 0x08, Reserved4: 0x00
Host Application Code: 0x00, Session Format: 0x00
Packet Size: 32, Audio Pause Length: 150
Media Catalog Number: 0x00000000000000000000000000000000
ISRC: 0x00000000000000000000000000000000
SubHeaderUCHAR0: 0x00, SubHeaderUCHAR1: 0x00
SubHeaderUCHAR2: 0x00, SubHeaderUCHAR3: 0x00
Vendor Specific: 0x00 0x00 0x00 0x00


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x52 0x01 0x00 0x00 0x00 0xFF 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x05, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x24, Additional Sense Code Qualifier (ASCQ): 0x00


CStarBurn_CdvdBurnerGrabber::GetInsertedDiscType(): ENTERed

CStarBurn_CdvdBurnerGrabber::GetInsertedDiscType(): EXITing with success, disc type == 0x00000003

CStarBurn_CdvdBurnerGrabber::Blank(): ENTERed for 1, 0

CStarBurn_CdvdBurnerGrabber::BlankForCDRW(): ENTERed

CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
Additional Sense Length: 0x0E (14)
Command Specific Information: 0x00 0x00 0x00 0x00
Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x08


CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

SCSI Status: 0x02, CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

SCSI sense data dump:
Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 07, 2007 8:35 am 
Offline
Site Admin

Joined: Fri Jun 18, 2004 12:03 am
Posts: 4089
Location: British Virgin Islands
viewtopic.php?t=741


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group