#1 Burning Software

Hi,

I'm trying to burn with TrackAtOnceFromTree. After the burn process finished without an error the disc is idle in Explorer, DeviceInfo shows the session. I tried to close the session but as i understand this does nothing when burnng RW-meida? Thx in advance for any help!

I've a debug-log of 800kb, should I post it here?

best regards
Raoul

Do you do eject after burning?

No, send it to [email protected]

yes, I do an eject/load after erasing and burning.

this is a snippet from the log-file where the first error occurs:

[3840] CStarBurn_CdvdBurnerGrabber::SetCdvdSpeeds(): ENTERed for 65535, 65535
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetCdvdSpeeds(): Setting speeds for DVD ( 9 )
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetCurrentSpeedsForDVD(): Ending LBA: 2295103
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetCdvdSpeeds(): EXITing with success
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): ENTERed for 1
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): Enabling JustLink style protection...
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): [ 1 ] Enabled bit: 1
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): JustLink buffer underrun protection, enabled status 1
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): Enabling BURN-Proof style protection...
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): [ 2 ] Enabled bit: 1
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): BURN-Proof buffer underrun protection, enabled status 1
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SetBUP(): EXITing with success, enabled: Yes
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SendOPC(): ENTERed
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SendOPC(): EXITing with success
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::Blank(): ENTERed for 1, 0
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::BlankForDVDPLUSRW(): ENTERed
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::FormatUnitForDVDPLUSRW(): ENTERed
[3840]
[3840] CStarBurn_ScsiTransportASPI::ExecuteCDB(): Command failed
[3840]
[3840] SCSI Request Block Dump:
[3840] SRB_Status: 0x04, SRB_HaStat: 0x00, SRB_TargStat: 0x02
[3840] CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[3840]
[3840]
[3840] SCSI sense data dump:
[3840] Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
[3840] Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
[3840] End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
[3840] Additional Sense Length: 0x0A (10)
[3840] Command Specific Information: 0x00 0x00 0x00 0x00
[3840] Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x04
[3840]
[3840]
[3840] CStarBurn_ScsiTransportASPI::ExecuteCDB(): Command failed
[3840]
[3840] SCSI Request Block Dump:
[3840] SRB_Status: 0x04, SRB_HaStat: 0x00, SRB_TargStat: 0x02
[3840] CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[3840]
[3840]
[3840] SCSI sense data dump:
[3840] Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
[3840] Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
[3840] End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
[3840] Additional Sense Length: 0x0A (10)
[3840] Command Specific Information: 0x00 0x00 0x00 0x00
[3840] Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x04
[3840]
[3840]
[3840] CStarBurn_ScsiTransportASPI::ExecuteCDB(): Command failed
[3840]
[3840] SCSI Request Block Dump:
[3840] SRB_Status: 0x04, SRB_HaStat: 0x00, SRB_TargStat: 0x02
[3840] CDB Length: 10, CDB Dump: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[3840]
[3840]
[3840] SCSI sense data dump:
[3840] Error Code: 0x70, Is Sense Valid: No, Segment Number: 0x00 (0)
[3840] Sense Key: 0x02, Reserved: 0x00, Incorrect Length: No
[3840] End Of Media: No, File Mark: No, Information: 0x00 0x00 0x00 0x00
[3840] Additional Sense Length: 0x0A (10)
[3840] Command Specific Information: 0x00 0x00 0x00 0x00
[3840] Additional Sense Code (ASC): 0x04, Additional Sense Code Qualifier (ASCQ): 0x04
[3840]
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::FormatUnitForDVDPLUSRW(): EXITing with success
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SynchronizeCache(): ENTERed
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SynchronizeCache(): VendorID <TSSTcorp>, ProductID <CDDVDW SH-S203D >, disc type 9
[3840]
[3840] CStarBurn_CdvdBurnerGrabber::SynchronizeCache(): Generic synchronization

There are NO errors in the log. And I need complete one and not the part you think makes sense. B/c it does not.